TY - JOUR
T1 - Mixing and combustion characteristics of kerosene In a model supersonic combustor
AU - Kumaran, K.
AU - Babu, V.
PY - 2009
Y1 - 2009
N2 - In this numerical study, supersonic combustion of kerosene in three model combustor configurations is investigated. To this end, 3-D, compressible, turbulent, nonreacting, and reacting flow calculations with a single step chemistry model have been carried out. For the nonreacting flow calculations, the droplet diameter distribution at different axial locations, variation of the Sauter mean diameter, and the mixing efficiency for three injection pressures are presented and discussed. In addition, the effect of turbulent dispersion on the mixing efficiency is studied using a stochastic model in conjunction with the two-equation shear stress transport κ-ω turbulence model. For the reacting flow calculations, contours of heat release and axial velocity at several axial locations are used to identify regions of heat release inside the combustor. Combustion efficiency predicted by the present results is compared with earlier predictions for all the combustor models. Furthermore, the predicted variation of static pressure along the combustor top wall is compared with experimental data reported in the literature. Calculations show that the penetration and spreading of the fuel increases with an increase in the injection pressure. Predicted values of the combustion efficiency are more realistic when the spray model is used for modelling the injection of the fuel. The importance of the mixing process, especially for a liquid fuel such as kerosene, on the prediction of heat release is discussed in detail.
AB - In this numerical study, supersonic combustion of kerosene in three model combustor configurations is investigated. To this end, 3-D, compressible, turbulent, nonreacting, and reacting flow calculations with a single step chemistry model have been carried out. For the nonreacting flow calculations, the droplet diameter distribution at different axial locations, variation of the Sauter mean diameter, and the mixing efficiency for three injection pressures are presented and discussed. In addition, the effect of turbulent dispersion on the mixing efficiency is studied using a stochastic model in conjunction with the two-equation shear stress transport κ-ω turbulence model. For the reacting flow calculations, contours of heat release and axial velocity at several axial locations are used to identify regions of heat release inside the combustor. Combustion efficiency predicted by the present results is compared with earlier predictions for all the combustor models. Furthermore, the predicted variation of static pressure along the combustor top wall is compared with experimental data reported in the literature. Calculations show that the penetration and spreading of the fuel increases with an increase in the injection pressure. Predicted values of the combustion efficiency are more realistic when the spray model is used for modelling the injection of the fuel. The importance of the mixing process, especially for a liquid fuel such as kerosene, on the prediction of heat release is discussed in detail.
UR - http://www.scopus.com/inward/record.url?scp=67649947207&partnerID=8YFLogxK
U2 - 10.2514/1.40140
DO - 10.2514/1.40140
M3 - 文章
AN - SCOPUS:67649947207
SN - 0748-4658
VL - 25
SP - 583
EP - 592
JO - Journal of Propulsion and Power
JF - Journal of Propulsion and Power
IS - 3
ER -