Fabrication of FeNi intermetallic using the wire-arc additive manufacturing process: A feasibility and neutron diffraction phase characterization study

Chen Shen; Klaus Dieter Liss; Mark Reid; Zengxi Pan; Xueming Hua; Fang Li; Gang Mou; Ye Huang; Yanyan Zhu; Huijun Li

doi:10.1016/j.jmapro.2020.07.027

Fabrication of FeNi intermetallic using the wire-arc additive manufacturing process: A feasibility and neutron diffraction phase characterization study

Chen Shen, Klaus Dieter Liss, Mark Reid, Zengxi Pan, Xueming Hua^*, Fang Li, Gang Mou, Ye Huang, Yanyan Zhu, Huijun Li

^*Corresponding author for this work

Materials Science and Engineering

Research output: Contribution to journal › Article › peer-review

9 Scopus citations

Abstract

FeNi intermetallic has been continuously attractive due to the appreciable magneto-crystalline anisotropy and high saturation magnetization in the nominally-equiatomic chemically ordered L1₀ structure. In the present research, the bulk FeNi alloy is successfully fabricated using an innovative wire-arca additive manufacturing process, which is also an in-situ alloying method. In the meantime, to characterize the thermal lattice evolution of the FeNi, neutron diffraction is conducted to the as-fabricated sample in-situ during a heat treatment process. According to the neutron results, an anisotropic fcc-FeNi lattice evolution has been detected, which indicates the existence of FeNi superstructure in the WAAM fabricated FeNi bulk material. In addition, due to the featured advantage of the neutron data, the fcc-FeNi volumetric lattice thermal expansion coefficients during heating and cooling processes are calculated.

Original language	English
Pages (from-to)	691-699
Number of pages	9
Journal	Journal of Manufacturing Processes
Volume	57
DOIs	https://doi.org/10.1016/j.jmapro.2020.07.027
State	Published - Sep 2020

Keywords

Additive manufacturing
Intermetallic
Neutron diffraction

Access to Document

10.1016/j.jmapro.2020.07.027

Cite this

@article{d3859f12ab7f4adaa4d2996e531c6c7f,

title = "Fabrication of FeNi intermetallic using the wire-arc additive manufacturing process: A feasibility and neutron diffraction phase characterization study",

abstract = "FeNi intermetallic has been continuously attractive due to the appreciable magneto-crystalline anisotropy and high saturation magnetization in the nominally-equiatomic chemically ordered L10 structure. In the present research, the bulk FeNi alloy is successfully fabricated using an innovative wire-arca additive manufacturing process, which is also an in-situ alloying method. In the meantime, to characterize the thermal lattice evolution of the FeNi, neutron diffraction is conducted to the as-fabricated sample in-situ during a heat treatment process. According to the neutron results, an anisotropic fcc-FeNi lattice evolution has been detected, which indicates the existence of FeNi superstructure in the WAAM fabricated FeNi bulk material. In addition, due to the featured advantage of the neutron data, the fcc-FeNi volumetric lattice thermal expansion coefficients during heating and cooling processes are calculated.",

keywords = "Additive manufacturing, Intermetallic, Neutron diffraction",

author = "Chen Shen and Liss, {Klaus Dieter} and Mark Reid and Zengxi Pan and Xueming Hua and Fang Li and Gang Mou and Ye Huang and Yanyan Zhu and Huijun Li",

note = "Publisher Copyright: {\textcopyright} 2020 The Society of Manufacturing Engineers",

year = "2020",

month = sep,

doi = "10.1016/j.jmapro.2020.07.027",

language = "英语",

volume = "57",

pages = "691--699",

journal = "Journal of Manufacturing Processes",

issn = "1526-6125",

publisher = "Elsevier BV",

}

TY - JOUR

T1 - Fabrication of FeNi intermetallic using the wire-arc additive manufacturing process

T2 - A feasibility and neutron diffraction phase characterization study

AU - Shen, Chen

AU - Liss, Klaus Dieter

AU - Reid, Mark

AU - Pan, Zengxi

AU - Hua, Xueming

AU - Li, Fang

AU - Mou, Gang

AU - Huang, Ye

AU - Zhu, Yanyan

AU - Li, Huijun

PY - 2020/9

Y1 - 2020/9

N2 - FeNi intermetallic has been continuously attractive due to the appreciable magneto-crystalline anisotropy and high saturation magnetization in the nominally-equiatomic chemically ordered L10 structure. In the present research, the bulk FeNi alloy is successfully fabricated using an innovative wire-arca additive manufacturing process, which is also an in-situ alloying method. In the meantime, to characterize the thermal lattice evolution of the FeNi, neutron diffraction is conducted to the as-fabricated sample in-situ during a heat treatment process. According to the neutron results, an anisotropic fcc-FeNi lattice evolution has been detected, which indicates the existence of FeNi superstructure in the WAAM fabricated FeNi bulk material. In addition, due to the featured advantage of the neutron data, the fcc-FeNi volumetric lattice thermal expansion coefficients during heating and cooling processes are calculated.

AB - FeNi intermetallic has been continuously attractive due to the appreciable magneto-crystalline anisotropy and high saturation magnetization in the nominally-equiatomic chemically ordered L10 structure. In the present research, the bulk FeNi alloy is successfully fabricated using an innovative wire-arca additive manufacturing process, which is also an in-situ alloying method. In the meantime, to characterize the thermal lattice evolution of the FeNi, neutron diffraction is conducted to the as-fabricated sample in-situ during a heat treatment process. According to the neutron results, an anisotropic fcc-FeNi lattice evolution has been detected, which indicates the existence of FeNi superstructure in the WAAM fabricated FeNi bulk material. In addition, due to the featured advantage of the neutron data, the fcc-FeNi volumetric lattice thermal expansion coefficients during heating and cooling processes are calculated.

KW - Additive manufacturing

KW - Intermetallic

KW - Neutron diffraction

UR - http://www.scopus.com/inward/record.url?scp=85088641662&partnerID=8YFLogxK

U2 - 10.1016/j.jmapro.2020.07.027

DO - 10.1016/j.jmapro.2020.07.027

M3 - 文章

AN - SCOPUS:85088641662

VL - 57

SP - 691

EP - 699

JO - Journal of Manufacturing Processes

JF - Journal of Manufacturing Processes

SN - 1526-6125

ER -

Fabrication of FeNi intermetallic using the wire-arc additive manufacturing process: A feasibility and neutron diffraction phase characterization study

Abstract

Keywords

Access to Document

Other files and links

Fingerprint

Cite this