Tungsten-coated divertor tiles exposed during the third JET ITER-Like Wall (ILW) campaign in 2015–2016 (ILW-3) were studied with Secondary Ion Mass Spectrometry (SIMS). ILW-3 campaign contained more high-power plasma discharges and longer plasma time than the earlier ILW campaigns. Measurements showed increased beryllium (Be) deposition on the upper inner divertor, whereas on the outer divertor, Be deposition was lower than during the second campaign in 2013–2014 (ILW-2). Increased intensities of nickel, molybdenum and tungsten were observed at the surface layer of the inner divertor Be dominated deposits. These layers are probably formed during the high-power plasma discharge phase near the end of the ILW-3 campaign. Compared to the earlier campaigns, D retention on the upper inner divertor was observed to on a similar level than after ILW-2, whereas at the lower inner divertor and most parts of the outer divertor, D retention was lower for ILW-3 than ILW-2. D retention was increased at lower part of outer divertor Tile 7, where Be deposition was slightly increased. Probable reason for the reduction is the higher surface temperature of the tiles due to higher powers used.
- Fuel retention