Carbon deposition in steam methane reforming over a Ni-based catalyst: Experimental and thermodynamic analysis

Dmitry Pashchenko*, Ivan Makarov

*Corresponding author for this work

Research output: Contribution to journalArticlepeer-review

9 Scopus citations

Abstract

The experimental investigation of the steam methane reforming process over an industrial Ni-based catalyst was presented. The set of experiments was performed in order to comprehend the effect of the carbon deposition on the methane conversion and pressure drop in a reformer. Various operating conditions such as temperature (600 °C and 800 °C), steam-to-methane ratio (0.5, 1.0, 2.0) and pressure were tested in the experiments. The thermodynamic analysis was accomplished to calculate the equilibrium carbon formation zones for various operating conditions and the experimental results were compared with the results of thermodynamic analysis. The experiments revealed that the methane conversion close to equilibrium is at a residence time of about 5 kgcat·s/ molCH4. The methane conversion as a function of the time on stream was experimentally determined. The maximum decrease in the methane conversion was observed for the steam-to-methane ratio (β) of 0.5. For β=2.0 and β=1.0, the decrease in the methane conversion is minimal. The reforming efficiency and mass of deposited carbon were determined for all investigated operation parameters. When the steam-to-methane ratio is greater than 1, the rate of carbon deposition has an almost linear dependence versus time on stream. For β=2 and T = 800 °C, the carbon deposition rate is approximately 0.12 g/h; for β=2 and T = 600 °C - 0.21 g/h, for β=1 and T = 800 °C - 0.29 g/h, for β=1 and T = 600 °C - 1.02 g/h.

Original languageEnglish
Article number119993
JournalEnergy
Volume222
DOIs
StatePublished - 1 May 2021
Externally publishedYes

Keywords

  • Carbon deposition
  • Experiment
  • Pressure drop
  • Reforming efficiency
  • Steam methane reforming

Fingerprint

Dive into the research topics of 'Carbon deposition in steam methane reforming over a Ni-based catalyst: Experimental and thermodynamic analysis'. Together they form a unique fingerprint.

Cite this