Accurate and self-consistent procedure for determining pH in seawater desalination brines and its manifestation in reverse osmosis modeling

Oded Nir*, Esra Marvin, Ori Lahav

*Corresponding author for this work

Research output: Contribution to journalArticlepeer-review

14 Scopus citations

Abstract

Measuring and modeling pH in concentrated aqueous solutions in an accurate and consistent manner is of paramount importance to many R&D and industrial applications, including RO desalination. Nevertheless, unified definitions and standard procedures have yet to be developed for solutions with ionic strength higher than ~0.7M, while implementation of conventional pH determination approaches may lead to significant errors. In this work a systematic yet simple methodology for measuring pH in concentrated solutions (dominated by Na+/Cl-) was developed and evaluated, with the aim of achieving consistency with the Pitzer ion-interaction approach. Results indicate that the addition of 0.75M of NaCl to NIST buffers, followed by assigning a new standard pH (calculated based on the Pitzer approach), enabled reducing measured errors to below 0.03 pH units in seawater RO brines (ionic strength up to 2M). To facilitate its use, the method was developed to be both conceptually and practically analogous to the conventional pH measurement procedure. The method was used to measure the pH of seawater RO retentates obtained at varying recovery ratios. The results matched better the pH values predicted by an accurate RO transport model. Calibrating the model by the measured pH values enabled better boron transport prediction. A Donnan-induced phenomenon, affecting pH in both retentate and permeate streams, was identified and quantified.

Original languageEnglish
Pages (from-to)187-195
Number of pages9
JournalWater Research
Volume64
DOIs
StatePublished - 1 Nov 2014
Externally publishedYes

Keywords

  • Brine
  • PH
  • Phreeqc
  • Pitzer
  • Reverse-osmosis

Fingerprint

Dive into the research topics of 'Accurate and self-consistent procedure for determining pH in seawater desalination brines and its manifestation in reverse osmosis modeling'. Together they form a unique fingerprint.

Cite this