A seeded ambient temperature ferrite process for treatment of AMD waters: Magnetite formation in the presence and absence of calcium ions under steady state operation

B. E. Morgan*, O. Lahav, G. R. Hearne, R. E. Loewenthal

*Corresponding author for this work

Research output: Contribution to journalArticlepeer-review

11 Scopus citations

Abstract

An ambient temperature ferrite process has been developed for the removal of iron and non-ferrous metals from AMD waters. The process involves the controlled formation of magnetite (Fe3O4) that has the capacity to substitute divalent and trivalent cations as part of the lattice, thus forming a stable easy-to-separate ferrite. This paper reports on continuous operations of the process in the absence and presence of Ca2+, which is well known to impede ferrite formation. In the first instance, the process involves the precipitation of hydroxy-metals at pH 10.5 and their subsequent adsorption onto magnetite seed in a contact stabilisation reactor. Second, liquid-solid separation is effected and the solid fraction is subsequently treated in an oxidising reactor in which a fraction of the ferrous species is oxidised to an intermediate ferric precipitate. Finally, both ferrous and ferric species undergo crystal-chemical processing and are incorporated into stable magnetite. Results indicate that Ca2+ interference can be overcome by maintaining a high ratio of precipitated ferrous species to dissolved Ca2+. It was found that in order to attain the required high Fe2+:Ca2+ ratio, the solid ferrous-hydroxy species concentration in the oxidation reactor should be maintained at above 1 200 mg Fe/l. Ferrous to calcium ratios greater than 3 were found to favour magnetite formation. In the absence of Ca2+, a solid ferrous-hydroxy species concentration of approximately 500 mg/l was sufficient for magnetite formation. Operating the process at ferrous-hydroxy concentrations of lower than 1 200 and 500 mg/l in the presence and absence of calcium respectively enhanced the formation of other iron oxides, primarily goethite. In all experiments the iron concentration in the effluent was less than 1 mg/l, the sludge volume index (SVI) extremely low (< 4 ml/g) and the percentage of ferrous-hydroxy species in the sludge can be reduced to about 1%. These features, together with the potential to incorporate heavy metals into a stable compound, make the process very promising for AMD treatment.

Original languageEnglish
Pages (from-to)117-124
Number of pages8
JournalWater S.A.
Volume29
Issue number2
DOIs
StatePublished - Apr 2003

Keywords

  • Acid mine drainage
  • Calcium interference
  • Ferrite process
  • Magnetite seed

Fingerprint Dive into the research topics of 'A seeded ambient temperature ferrite process for treatment of AMD waters: Magnetite formation in the presence and absence of calcium ions under steady state operation'. Together they form a unique fingerprint.

Cite this