A novel configuration for high power-output and highly efficient vibration energy harvesting

TY - JOUR

T1 - A novel configuration for high power-output and highly efficient vibration energy harvesting

AU - Liu, Mingyi

AU - Mi, Jia

AU - Tai, Wei Che

AU - Zuo, Lei

N1 - Publisher Copyright: © 2021 Elsevier Ltd

PY - 2021/8/1

Y1 - 2021/8/1

N2 - The most commonly used vibration energy harvesting system is the single-degree-of-freedom (SDOF) system. However, the power output of the SDOF system is limited by the mechanical damping ratio and the efficiency is only 50% at the maximal power output. In this paper, we modified the SDOF configuration by adding a spring in series with the energy transducer, which results in a configuration where a parallel energy-harvesting damper and inerter are in series with the spring, similar to the Maxwell model. The parameters of the proposed configuration are analyzed and optimized. The optimization results show the new configuration can produce many times more power output compared with the conventional SDOF system if the primary spring is relatively soft and the added spring is properly selected. In addition, the energy-harvesting efficiency can be significantly increased at the maximal power output. A lab experiment of backpack setup demonstrated 82% power increase and an efficiency of 83%. Lab test using a bridge vibration induced by freight train finds out that the proposed configuration can double the power output compared with the conventional SDOF system. With the augment of a simple spring, the proposed configuration disrupts the fundamental limit on the power and efficiency of the conventional SDOF energy-harvesting system, which opens a new perspective in the energy-harvesting field.

AB - The most commonly used vibration energy harvesting system is the single-degree-of-freedom (SDOF) system. However, the power output of the SDOF system is limited by the mechanical damping ratio and the efficiency is only 50% at the maximal power output. In this paper, we modified the SDOF configuration by adding a spring in series with the energy transducer, which results in a configuration where a parallel energy-harvesting damper and inerter are in series with the spring, similar to the Maxwell model. The parameters of the proposed configuration are analyzed and optimized. The optimization results show the new configuration can produce many times more power output compared with the conventional SDOF system if the primary spring is relatively soft and the added spring is properly selected. In addition, the energy-harvesting efficiency can be significantly increased at the maximal power output. A lab experiment of backpack setup demonstrated 82% power increase and an efficiency of 83%. Lab test using a bridge vibration induced by freight train finds out that the proposed configuration can double the power output compared with the conventional SDOF system. With the augment of a simple spring, the proposed configuration disrupts the fundamental limit on the power and efficiency of the conventional SDOF energy-harvesting system, which opens a new perspective in the energy-harvesting field.

KW - Energy-harvesting

KW - High efficiency

KW - High power output

KW - Inerter

KW - Maxwell model

UR - http://www.scopus.com/inward/record.url?scp=85107620211&partnerID=8YFLogxK

U2 - 10.1016/j.apenergy.2021.116957

DO - 10.1016/j.apenergy.2021.116957

M3 - 文章

AN - SCOPUS:85107620211

SN - 0306-2619

VL - 295

JO - Applied Energy

JF - Applied Energy

M1 - 116957

ER -